|
|
|
1. Dimensions:
|
Vigil
Antislip Deckmark is measured in two dimensions; length ways
(A) and width (B). The thickness ranges from 11mm - 13mm dependant
upon the grade required.
|
|
A:
|
Length
of Deckmark: There are two standard
lengths; 600mm and 200mm. unlike Metal Deck, due to the greater
thickness of Deckmark, each sheet should be butted up against the
next to avoid the possibility of trips occuring. |
|
B:
|
Width
of Deckmark: As with Metal Deck, Deckmark need not cover the
entire width of the walkway or ramp. Personnel tend not to walk
on the edges of walkways so it is recommended that Deckmark 150mm
- 300mm narrower than the overall walkway be ordered, ie. if ordering
Deckmark for an 800mm wide walkway, 600mm wide Deckmark will provide
ample protection.
|
 |
|
|
| Standard
Dimensions: |
|
A:
|
200mm (7.9"), 600mm (23.6") |
|
B:
|
450mm (17.7"), 600mm (23.6"), 750mm (29.5"), 900mm (35.4"),
1200mm (47.2") |
|
| 2.
Grade: |
Three
standard grades exist in the range of Vigil Antislip Deckmark;
commercial, industrial and offshore. Commercial grade is normally
used in areas where heavy spillage or soilage does not occur.
Industrial grade is used on most external areas where there may
be spillage and/or soilage from lubricants. Offshore grade is
used on areas where there is a high buildup of grease or oil.
This surface is the most severe and is not affected by very heavy
spillage and soilage of chemicals or lubricants.
|
| 3.
Colour: |
In
all Industrial or Offshore applications, the Safety Yellow color
is recommended. If Commercial grade Stair Nosings are to be utilise
internally, other colours which are more aesthetic may be preferred.
|
| 4.
Foundation: |
The
HD-3 foundation used for Deckmark is a completely non-metallic
mixture of sawdust and phenolic resin compressed under extreme
pressure and heat. The result is a rigid 10mm thick base used
for applications where the steel or vinyl foundations are not
suitable.
|
| 5.
Installation: |
Vigil
Antislip Deckmark can be installed over virtually any flat surface
so many installation methods can be applied. In most cases, adhesive,
cup head bolts with nyloc nuts, self tapping screws or concrete
anchors will fix Deckmark. Like all other Vigil Antislip products,
any drilling should be carried out from the underside of the Deckmark
through to the surface.
|
| 6.
Cleaning: |
Because
of the extreme hardness and chemical resistance of Vigil Antislip
Deckmark, cleaning can be effected with high pressure steam or
water, degreasers, detergents or solvents. Stubborn soilage can
be removed with a stiff deck broom. If solvents have been used,
hose off with water at your earliest convenience. Do not use scrapers
or wire brushes.
|
| 7.
General: |
Ensure
that Deckmark is installed correctly as loose sheets can be dangerous.
If using electric or pneumatic tools, ensure that appropriate
safety glasses and ear protection are worn.
|
Product
Description | Ordering recommendations
| Product Specifications | Test
Results | Back to Top
For
more information please contact us.
|
 |
