Deck Mark

Vigil Antislip Deck Mark is designed to provide fleeing workers with a clearly visible non-slip pathway in safety black and yellow, usually with diagonal striping to indicate a hazard, or with directional and other markings that aid in safe escape.

 

All Deck Mark products exhibit exactly the same non-slip properties as other Vigil Antislip products, and are available in the same standard sizes and dimensions as the Vigil Antislip Stair Nosing, Metal Deck, Vinyl Deck and Ladder Rung ranges, in commercial, industrial and offshore grades.

  1. Designs

    Every evacuation route will cover different surfaces, directions and guidance requirements, so clients are encouraged to contact the Vigil Antislip team to discuss the specific requirements of the site. We have a range of standard markings, designs and directional indicators, but we can also provide a tailored solution to maximise the safety of your personnel.

  2. Classes

    Any Vigil Antislip product can be created with Deck Mark evacuation markings, so all classes are available as evacuation aids.

    CLASS CHARACTERISTICS WARRANTY
    1 Available in Offshore, Industrial, Light Industrial, Commercial and Barefoot Grades
    1.2mm Grade 316 Stainless Steel for all splash zone (sea level + 5m) areas, and acidic areas
    1.2mm AM100 Colorbond Steel for all other areas
    High gauge resists flexing and delamination and is resistant to impact
    Resistant to all solvents, petroleum products and acid solutions
    Silicone carbide (SiC) Aggregate Moh’s hardness rating of 9.2 – 9.5 (actual hardness 2480kg/m2)
    Warranted against delamination, chemical attack, wear and corrosion in normal use 10 year replacement guarantee
    2 Available in Offshore, Industrial and Light Industrial Grades
    1.2mm Grade 316 Stainless Steel for all splash zone (sea level + 5m) areas, and acidic areas
    1.2mm AM100 Colorbond Steel for all other areas
    High gauge resists flexing and delamination and is resistant to impact
    Resistant to all solvents, petroleum products and acid solutions
    Silicone carbide (SiC) Aggregate Moh’s hardness rating of 9.2 – 9.5 (actual hardness 2480kg/m2)
    Warranted against delamination, chemical attack, wear and corrosion in normal use 3 year repair guarantee
    3 Available in Offshore and Industrial Grades (Stair Nosings only)
    1.5mm Galvanised Steel
    High gauge resists flexing and delamination and is resistant to impact
    Should not be used in corrosive environments
    Fused Alumina Aggregate Moh’s hardness rating of 9.0 (actual hardness 1800kg/m2)
    Warranted against delamination, chemical attack, wear and corrosion in normal use 1 year replacement guarantee

  3. Dimensions

    Vigil Antislip Deck Mark designs can be applied to the complete range of Vigil stair nosings, metal deck, vinyl deck and ladder rung covers, in the same dimensions as those products as shown below.

  4. Grades

    Deck Mark is available in all grades, according to the same parameters as stair nosings, metal deck, vinyl deck and ladder rung covers. For information on specific product grades, please click on the links below:

    Stair Nosings
    Metal Deck
    Vinyl Deck
    Ladder Rung Covers

  5. Warranty

    How we can offer a 10 Year Replacement Warranty

    As innovators and pioneers in the safety industry, it is important that we lead by example.

    Our production manuals contain the QA/QC requirements for every process. As a basic rule, every production team member acts as a buyer and a seller. When a process is completed, the person who conducted that process becomes the internal seller of the product to that stage. It is then passed on to the next person in the production process – the internal buyer – who checks all specifications, etc. to ensure the previous process was carried out in accordance with requirements.

    The product continues through the production process that way, being rigorously checked by the ‘internal buyer’ at every stage.

    Every process is also signed off by the operator on the Job Card. This ensures quality is maintained and checked throughout all processes rather than just at the packaging stage. All raw materials are checked upon receipt, resins are tested for hardness and so on.

    When the products are completed, the Job Card number becomes the Warranty Number and this is stamped on the underside of every product so it can be traced should there ever be a future issue.

    The 10 Year Replacement Warranty Certificate provided with every Class 1 is signed by the Managing Director and the Production Manager. The Job Cards are archived for a minimum of 10 years so they may be recovered and the production process traced if necessary.

     

    For more information please contact us.

  6. Technical Specifications

    Class 1

    Steel Foundation Splash Zones 1.2mm Grade 316 Stainless Steel
    Acidic areas 1.2mm Grade 316 Stainless Steel
    All other areas 1.2mm AM100 Colorbond Steel
    Fabric Medium Floating on steel foundation and integrated with key coat of resin system
    Resin System All layers hand laminated – not sprayed
    Cured at optimum temperature and humidity – no oven use
    Resistant to all solvents, petroleum products and acid solutions
    Must not contain any pin-prick holes or bubbles.
    Aggregate Silicone Carbide (SiC) Moh’s hardness rating of 9.2 – 9.5
    Actual Hardness : 2,480Kg / mm2
    Size of Aggregate Offshore Grade 12/20 mesh matrix
    Industrial Grade 20 Mesh
    Light Industrial Grade 24 Mesh
    Barefoot Grade 100 Mesh
    Commercial Grade 46 Mesh
    Warranty 10 Years

     

    Test Result Summary.

    Resistance to Abrasion
    Test Method   : ASTM D658

    Result:                                         > 313.60 g / mm.

                                                                                                   

    Resistance to Fire.
    Test Method   : AS 1530.3.1989 AMDT No 1 APR 92

    Results

    • Ignition Time:                       5.78 mins

    • Flame Propagation Time:    Nil S

    • Heat Release Integral:         71.1 kJ/sq. M

    • Smoke Release, Log D:        – 0.8101

    • Optical Density, D:               0.1572 / M

     

    Regulatory Indices

    Ignitability Index : 14             Range 0-20

    Spread of Flame Index *:         0

    Heat Evolved Index*:               2

    Smoke Developed Index*:      5

    * Range = 0-10

                                                                                                   

    Slip Resistance.
    Test Method   : ASTM D4518

    Results

    • Dry Condition:                       0.53

    • Wet Condition:                      0.50

    • Oiled Condition:                    0.49

    • Oiled After Impact:               0.41


    Test Method   : DIN 511 30

    Results

    • Commercial Grade:              R-13

    • Industrial Grade:                  R-13

    • Offshore Grade:                    R-12

     

    Test Method   : AS / NZ 3661.1

    Results

    • Comm. grade – Dry leather:    1.30

    • Comm. grade – Dry rubber:    1.30

    • Comm. grade – Wet rubber:   0.95

     

    • Ind. grade – Dry leather:         1.50.

    • Ind. grade – Dry rubber:         1.30.

    • Ind. grade – Wet rubber:         0.85.

     

    • Offshore grade – Dry leather: 1.80.

    • Offshore grade – Dry rubber:  1.90.

    • Offshore grade – Wet rubber:  0.85.

     

    Test Method   : AS 4586:2013

    Results

    • Comm. grade                           – COF : 1.05

    – Class : D1

    • Lt. Ind. Grade                          – COF : 1.00

    – Class : D1

    • Industrial Grade                     – COF : 1.00

    – Class : D1

    • Offshore Grade                       – COF : 1.00

    – Class : D1

    Please Note : All Test Certificates are available upon request.

Please refer to Installation instructions for specific products ordered as Deck Mark. Click on the links below for more information:

Stair Nosings
Metal Deck
Vinyl Deck
Ladder Rung Covers

Download a Vigil Antislip Self Assessment Form

Or request a complete Self-Assessment Pack including:

  • Vigil Slip Hazard Form
  • Vigil Antislip Sample Pack
  • Vigil Antislip Industrial Catalogue



  • This field is for validation purposes and should be left unchanged.

Enquire about this product




  • This field is for validation purposes and should be left unchanged.